Kramer Electronics VP-727A-BA - Manual (Page 7)

Your VP-727A-BA Balanced Audio Switcher
5
Table 1: VP-727A-BA Balanced Audio Switcher Front Panel Features
# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
2 PREVIEW Input Buttons Press to select an audio source to switch to the PREVIEW output 1
3 PROGRAM Input Buttons Press to select an audio source to switch to the PROGRAM output 1
4 MUTE Preview Button Press to disable/enable the preview audio output
5 Program Button Press to disable/enable the program audio output
6 CONTROL SELECT Button Press to cycle 2 between the BASS, TREBLE, BALANCE and DELAY 3
7 IN LEVEL Button Press to select 2 the PROGRAM or the PREVIEW input audio level for
each program and preview channel
8 OUT LEVEL Button Press to select 2 the PROGRAM, the PREVIEW or the PHONES output
audio level
9 LOCK Button Press and hold to lock/unlock the front panel buttons
10 PHONES 6.3mm Jack Connect to the headphones
11 Button Press to select 2 which output (PROGRAM or the PREVIEW) to send to
the headphones
12 AUDIO LEVEL 7-segment Display Displays the numerical value of the CONTROL feature 4
13 + Button Press to increase the level 4
14 - Button Press to decrease the level 4
15 TAKE Button Press to swap the preview input with the program input 5
16 FADE Button Press to create a dissolved transition from the PREVIEW to the
PROGRAM output
17 AFV Button When pressed, the button is illuminated, and the audio channels
follow the video channels (on the VP-727xl or the VP-727)
Deselect AFV to switch the audio channels independently
1 From 1 to 8
2 The appropriate LED lights
3 The BASS, TREBLE and BALANCE levels are set for the PROGRAM output. The DELAY is set for each PROGRAM input
4 BASS, TREBLE, BALANCE, DELAY, audio input level (PREVIEW AND PROGRAM), and audio output level
(PREVIEW AND PROGRAM)
5 To reset the VP-727A-BA to its factory default settings, turn the unit OFF, then turn it ON while pressing the TAKE button for about
2 seconds: The preview and program input is set to input 1, the input volume resets to 0dB, and the bass and treble levels reset to 0