3 upgrading firmware, Upgrading firmware, Figure 8: splash screen – Kramer Electronics VP-727A-BA User Manual

Page 20: Figure 9: atmel – flip window, N 7.3)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Flash Memory Upgrade

7.3 Upgrading Firmware

Follow these steps to upgrade the firmware:
1. Double click the desktop icon: “Shortcut to FLIP.EXE”.

The Splash screen appears as follows:

Figure 8: Splash Screen

2. After a few seconds, the Splash screen is replaced by the “Atmel – Flip”

window:

Figure 9: Atmel – Flip Window

3. Press the keyboard shortcut key F2 (or select the “Select” command from

the Device menu, or press the integrated circuit icon in the upper right

corner of the window).

The “Device Selection” window appears: