Kramer Electronics VP-727A-BA - Manual (Page 23)

Flash Memory Upgrade
21
Figure 14: Atmel – Flip Window (Connected)
9. Click Run.
After each stage of the operation is completed, the check-box for that
stage becomes colored green 1 .
When the operation is completed, all 4 check-boxes will be colored green
and the status bar message: Memory Verify Pass appears
2
:
Figure 15: Atmel – Flip Window (Operation Completed)
10. Close the “Atmel – Flip” window.
11. Disconnect the power on the VP-727A-BA.
1 See also the blue progress indicator on the status bar
2 If an error message: “Not Finished” shows, click Run again