1 the main menu – Kramer Electronics VP-690 User Manual
Page 16

12
VP-690 - Controlling the VP-690
6.2.1
The MAIN MENU
Mode
Function
CONTRAST
Set the contrast
The range and default values vary according to the input signal
BRIGHTNESS
Set the brightness
The range and default values vary according to the input signal
FINETUNE
(see
Section
COLOR
Set the red, green and blue shades
SIZE
Select the size of the display: FULL, OVERSCAN, UNDER1, UNDER2,
LETTER BOX, PANSCAN (default, FULL)
UNDER1 refers to an underscan of 6% and UNDER2 refers to an underscan of
9%
SOURCE
Select the source (default VGA):
Source input
Appears as:
Source input
Appears as:
CV 1
CVBS1
VGA 2
PC 2
CV 2
CVBS2
HDMI 1
HDMI 1
COMP 1
YPBPR 1
HDMI 2
HDMI 2
COMP 2
YPBPR 2
SDI
SDI
VGA 1
PC 1
OUTPUT
Select the output resolution from the menu (default NATIVE):
Output resolution:
Appears as:
Output resolution: Appears as:
NATIVE
1080p @50Hz
1080P50
640x480
VGA
1366x768
WXGA
800x600
SVGA
1680x1050
WSXGA
1024x768
XGA
1920x1200
WUXGA
1280x1024
SXGA
1280x800
1280x800
1600x1200
UXGA
1440x900
WXGA+
480i
480I
1400x1050
SXGA+
480p
480P
1600x900
1600x900
720p @50Hz
720P60
2048x1080@50
2K50
1080i @60Hz
1080I60
2048x1080@60
2K60
1080p @60Hz
1080P60
480I59
576i
576I
480P59
576p
576P
720P59
720p @50Hz
720P50
1080I59
1080i @50Hz
1080I50
1080P59
Select “NATIVE” to select the output resolution from the EDID of the connected
HDMI monitor
AUDIO
See
Section
OSD
Set the OSD parameters: H POSITION, V POSITION, TIMER,
BACKGROUND and DISPLAY (see
Section
HDCP ON INPUT Set to ON or OFF.
HDCP support can be enabled (ON) or disabled (OFF) for each of the
HDMI inputs, allowing the source to transmit a non-HDCP signal if
required