Kramer Electronics VP-690 - Manual (Page 15)

VP-690 - Controlling the VP-690 11
11
6 Controlling the VP-690
The VP-690 can be controlled via:

The front panel buttons (see Section
6.1
)

The OSD menu (see Section 6.2 )

RS-232 serial commands transmitted by a touch screen system, PC, or other
serial controller (see Section
6.3
)

The ETHERNET (see Section
6.4
)

The infrared remote control transmitter (see Section 6.5 )
6.1 Controlling via the Front Panel Buttons
The VP-690 includes the following front panel buttons:

Input selector buttons for selecting the required input: CV (1 and 2),
COMPONENT (1 and 2), PC (1 and 2), HDMI (1 and 2), or SDI

BLANK, MUTE and FREEZE buttons

MENU, ENTER, and arrow buttons (up, down, left and right)

RESET TO XGA/720p and PANEL LOCK buttons
6.2 Using the OSD Menu
The control buttons let you control the VP-690 via the OSD menu.
Press the:

MENU button to enter the menu
The default timeout is set to 10 seconds

ENTER button to accept changes and to change the menu settings

Arrow buttons to move through the OSD menu, which is displayed on the
video output
On the OSD menu, select EXIT to exit the menu.