Kramer Electronics VP-438 - Manual (Page 18)

VP-438 - Controlling the VP-438 15
6.4 Controlling via the Infrared Remote Control Transmitter
You can control the VP-438 from the infrared remote control transmitter, as
defined in Figure 4 :
Figure 4: Infrared Remote Control
Transmitter
Keys Function
SIZE Set the size of the image displayed
POWER Toggle the power save mode ON or
OFF
CV1 Select the composite video 1 input
CV2 Select the composite video 2 input
COMP1 Select the component video 1 input
COMP2 Select the component video 2 input
PC1 Select the UXGA 1 input
PC2 Select the UXGA 2 input
HDMI1 Select the HDMI 1 input
HDMI2 Select the HDMI 2 input
HDMI3 Select the HDMI 3 input
HDMI4 Select the HDMI 4 input
XGA Reset Reset the resolution to XGA
720p Reset Reset the resolution to 720p
INFO Displays the selected input, the input
and output resolutions and the firmware
versions on the OSD
NATIVE Select the output resolution via the
EDID of the connected HDMI monitor
Four navigation keys
When not in the OSD, the left and
right arrows also control the output
volume
For embedded HDMI inputs, this does
not affect the embedded output
OK Press to accept changes
MENU Enter the OSD menu
EXIT EXIT the menu
FREEZE Freeze/unfreeze the output video image
BLANK Toggle between a blank screen and the
display
MUTE Toggle between muting (blocking out
the sound) and enabling the audio
output
SIZE POWER
CV1
COMP2
CV2
PC1
COMP1
PC2
HDMI1 HDMI2 HDMI3
HDMI4
INFO NATIVE
MENU EXIT
FREEZE BLANK MUTE
LR-30