Kramer Electronics TP-205A - Manual (Page 8)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Configuring the TP-205A
6
Figure 2 and Table 2 define the underside of the TP-205A
Figure 2: TP-205A Underside
Table 2: Features of the TP-205A Underside
Feature Function
HS Switch 1 Slide the switch up, to set the H SYNC to negative polarity (NEGATIVE)
Slide the switch down, to set the H SYNC to its input polarity (NORMAL)
VS Switch 1 Slide the switch up, to set the V SYNC to negative polarity (NEGATIVE)
Slide the switch down, to set the V SYNC to its input polarity (NORMAL)
5 Configuring the TP-205A
This section describes how to:
• Connect the TP-205A (see section 5.1 )
• Connect an additional TP-205A (see section 5.2 )
• Wire the CAT 5 LINE IN/LINE OUT RJ-45 Connectors (see section 5.3 )
• Control via RS-232 (see section 5.4 )
1 By default, both switches are set down (for normal V SYNC and H SYNC polarity)