Kramer Electronics VP-400K - Manual (Page 7)

4 VP-200K, VP-300K, VP-400K - Overview
3 Overview
The Kramer TOOLS VP-200K, VP-300K and VP-400K are 1:2, 1:3 and 1:4
(respectively) distribution amplifiers for UXGA and higher resolution signals.
The VP-200K, VP-300K and VP-400K accept one input, provide correct buffering
and isolation, and then distribute the signal to two, three or four (respectively)
identical outputs on high-density 15-pin HD connectors.
In particular, the high-resolution UXGA DAs feature:

High video bandwidth exceeding 400MHz, ensuring transparency even at
high-resolution graphics modes such as UXGA (1600x1200)

DDC (Display Data Channel) communication support between the input and
output 1 high-density 15-pin HD connectors on pins 11, 12 and 15

EDID PassThru that passes EDID signals from source to display

Kramer
’s innovative integrated sync processing; KR-ISP™ technology,
which lets you achieve a sharp, stable image when the sync level is too low,
by restoring the sync signal waveform

An ID Bit control switch as well as polarity switches

5V DC operation and a DigiTOOLS
®
enclosure