7 technical specifications, Table 4 includes the technical specifications, Technical specifications – Kramer Electronics VP-12NHD User Manual
Page 13: Table 4: technical specifications
Technical Specifications
11
7 Technical Specifications
Table 4 includes the technical specifications:
Table 4: Technical Specifications
1
of the VP-12NHD 1:12 + 3 UXGA / CAT5 Distributor
2
INPUT:
1 UXGA on an HD15F connector
OUTPUTS:
12 UXGA on HD15F connectors
3 RJ-45 OUT connectors
MAX. OUTPUT LEVEL
3
: UXGA: 1.8Vpp; CAT5: 1.6Vpp
BANDWIDTH (-3dB)
4
:
UXGA: 340MHz; CAT5: 150MHz
DIFF. GAIN:
0.17%
DIFF. PHASE:
0.44°
K-FACTOR:
<0.05%
S/N RATIO:
73dB
CONTROLS:
Level: -0.8dB to 2.4dB, 2 switches for sync inversion
COUPLING:
UXGA: DC; CAT5: AC
POWER SOURCE:
230 VAC, 50 / 60 Hz (115VAC, U.S.A.) 31VA
DIMENSIONS:
19 inch (W), 7 inch (D) 1U (H) rack mountable
WEIGHT:
2.7 kg. (6 lbs.) approx.
ACCESSORIES:
Power cord
1 Specifications are subject to change without notice
2 Specifications are shown for the UXGA output, unless stated otherwise
3 The CAT5 output is measured at the TP-120 output, at maximum TP-120 gain of the TP-12N and the TP-120 setup
4 The CAT5 output is measured at the TP-120 output on the TP-12N and the TP-120 setup