Kramer Electronics VM-2HDCPxl - Manual (Page 8)

VM-2HDCPxl - Overview 5
3.1 Defining the VM-2HDCPxl 1:2 DVI Distributor
This section defines the VM-2HDCPxl.
Figure 1: VM-2HDCPxl 1:2 DVI Distributor
# Feature Function
1 EDID Button Press to read the EDID of the selected display (see
section
‎4.1 )
2 INPUT DVI Connector Connect to the DVI source
3 IN LED Lights when the input is active; flashes when the input is
not valid
4 OUTPUTS 1 LED LED lights when OUTPUT 1 is connected and active;
LED flashes when selecting the EDID (see section
‎4.1 )
5 OUTPUTS 2 LED LED lights when OUTPUT 2 is connected and active;
LED flashes when selecting the EDID (see section
‎4.1 )
6 ON LED Lights when the unit is powered
7 OUTPUT 1 DVI Connector Connect to the DVI acceptor 1
8 OUTPUT 2 DVI Connector Connect to the DVI acceptor 2
9 5V DC +5V DC connector for powering the unit