Kramer Electronics VM-80V - Manual (Page 9)

KRAMER ELECTRONICS LTD.
8
5.2 Getting To Know Your VM-10AN Amplifier
The Kramer VM-10AN is a compact, high quality 1:10 distribution amplifier using BNC connectors for
composite video, and RCA connectors for stereo audio signals. It accepts one set of inputs, provides correct
buffering and isolation, and distributes it to up to ten identical outputs designed to drive monitors, projectors,
and other receiving devices. Bandwidth exceeding 70MHz ensures transparent performance with typical video
and audio sources. Looping inputs make it easy to expand to larger distribution systems.
The VM-10AN can also be mounted in a standard 19” rack using the RK-10 kit, which holds one unit in two
vertical spaces. Front/Rear panel features of the VM-10AN are described in Figure 2 and Table 2.
Figure 2: VM-10AN Front/Rear Panel Features
Table 2: VM-10AN Front/Rear Panel Features
No. Feature Function
1. POWER - Illuminated power switch
(on front panel)
Supplies power to the unit.
2. INPUT Video and audio inputs
3. TERMINATION pushbutton Selects "75ohm" or "HI-z" impedance (pressed=75ohm).
For looping select "Hi-z".
4. LOOP Video and audio loop connectors.
5. VIDEO AUDIO OUTPUTS 10 amplified and buffered video and audio stereo outputs.
6. Power connector A 3-prong power cord allows power to be supplied to the
unit.
6. INSTALLATION
The amplifier is provided with four rubber feet packed in a separate bag. Fit the feet to the unit, place it on the
table remote from heat generating sources and make the required connections. Use a rack adapter in case a rack
installation is required (see section 4.1 "Rack Adapters"), in which case do not attach the feet.