Asus A7V133-C - Manual (Page 78)

ASUS A7V133 User’s Manual 78
4. BIOS SETUP
4. BIOS SETUP Hardware Monitor
4.5.2 Hardware Monitor
MB Temperature [xxxC/xxxF]
CPU Temperature [xxxC/xxxF]
The ASUS onboard hardware monitor reports this temperature. It may be
higher than those readings reported by external thermal sensors but reflects
the CPU temperature more accuratelyHard_Monitor.
JTPWR Temperature [xxxC/xxxF]
Using a thermal sensor cable, user may monitor the temperature of any
onboard device.
CPU Fan Speed [xxxxRPM]
Power Fan Speed [xxxxRPM]
Chassis Fan Speed [xxxxRPM]
The onboard hardware monitor is able to detect the CPU fan speed, power
supply fan speed, and the chassis fan speed in rotations per minute (RPM).
The presence of the fans is automatically detected. Set to [Ignore] only if
necessary.
VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage [xx.xxV]
The onboard hardware monitor is able to detect the voltage output by the
onboard voltage regulators. Set to [Ignore] only if necessary.
NOTE: If any of the monitored items is out of range, an error message will
appear: “Hardware Monitor found an error. Enter Power setup menu for
details”. You will then be prompted to “Press F1 to continue, DEL to enter
SETUP”.