APC Command Line Interface - Manual (Page 20)

Command Reference: Outlet Commands
16 Command Line Interface (CLI) User’s Guide
on
Syntax:
all
on outlet|range[,outlet|range...]
Description: Turn on one or more outlets. If you
specify more than one outlet, the outlets will turn
on approximately at the same time. However, for
close synchronization, outlets must be configured
as part of a synchronized outlet group.
Parameters:
Example:
on 1,5-7
Output Format (for the preceding example):
OK
1: Database Server: Outlet turned on.
5: Disk Array PS 1: Outlet turned on.
6: Disk Array PS 2: Outlet turned on.
7: Disk Array PS 3: Outlet turned on.
Example:
on “Web Server”
Output Format (for the preceding example):
OK
2: Web Server: Outlet turned on.
3: Web Server: Outlet turned on.
Error Messages:
E101, E104
all The value all turns on all outlets of the
Switched Rack PDU. This value is not case-
sensitive.
outlet An outlet name or number. If you specify a
name that contains a Space character, you
must enclose the name in quotation marks.
range A range of outlet numbers, with a hyphen
separating the starting number from the
ending number.