EZ Dupe Multi-Format 1 Copy Duplicator - Manual (Page 36)

II. Function Introduction
**Note:
Skip Read Error cannot fix the error on the source disc; all it does
is skip the errors and keeps copying the rest of the readable data.
•
Change Bad Master: This setting will make the system eject a
bad source disc and ask for another one if the source disc is
unreadable by the system.
•
CD Overburn: The majority of discs have a small margin of extra
groove at the outer edge. This setting allows you to copy data
over the normal size limit.
•
Show HDD Image Name: You can select to show HDD image
name or capacity on Copy, Test, Copy + Compare and Compare
function
Show HDD Image Name: Show capacity:
**Note:
When you change the source from drive to HDD, the LCD
will show the HDD information. To change your source reader
please refer to 6. Select Source.
•
Keep Buffer: You can set Yes to load source disc to buffer in first
round of Copy, Test, Compare or Copy+Compare and do it again
without the source disc. Or set No to keep buffer from being used.
**Note:
The source will only be temporarily saved in buffer, there will be
nothing left when you exit the task (Copy, Test, Compare and
Copy+Compare) or reboot the system.
•
Boot Password: This setting allows you to enable or disable
the user administrative password. Users have to login when the
system is booted on.
•
Setup Password: You can set up password by pressing to
select the number you like and press to set next number.
36