EZ Dupe Multi-Format 1 Copy Duplicator - Manual (Page 10)

II. Function Introduction
Chapter 1. MultiMedia Duplication
Select Multimedia Dupe from the main menu and press to start Flash to
disc copy operation.
1. Copy
The copy function in Multimedia duplication has three main options: Multi-
Session, Disc Spanning and MultiDisc. Each mode can be enabled or
disabled in Setup function. (Please refer to 6.Setup, page 17)
**Note:
Before copying, it is recommended to check each memory card, USB
or BD/DVD/CD’s content information. For more info on the check
function please refer to 4.Information.
1. Insert a Flash device (ex: USB, SD, MMS…) into the proper slot as source
and place a disc into the writer tray as target for duplication. If you would
like to copy many discs at the same time, you can place more than one
blank disc into the writer drives.
2. Select 1.Copy and press to start copying.
3. The system will detect the source and the target disc automatically.
Total capacity Data size Data size
Copy process% Copied data size
10