EZ Dupe Multi-Format 1 Copy Duplicator - Manual (Page 18)

II. Function Introduction
2. Select 2.Disc Spanning and press .
3. Use / to enable or disable the copy function.
** Note:
Disc spanning cannot be executed at the same time a s Multidisc
mode. When both modes are enabled, the system will execute disc
spanning.
6-3. MultiDisc
The MultiDisc copy mode allows you to duplicate multiple discs from
one Flash device. You can enable or disable this mode here.
1. Select 6.Setup and press .
2. Select 3.MultiDisc and press .
3 Use / to enable or disable the copy function.
18