DOCTER DOCTER®sight II plus - Manual (Page 15)

Ambient conditions 15
ENGLISH
Remark
Covering the sensor with your finger will affect the function of the control electro-
nics only slightly. If you want to check its function, it is advisable to cover the sen-
sor with a surface of the protective cover.
To ensure that the device is always ready for use, the circuit is so adjusted that
the light-emitting diode will not go out even if it is completely dark. The energy
consumption is so low then that a service life of about 4 years is ensured.
Ambient conditions
DOCTERsight is water-resistant, but not waterproof.
DOCTERsight remains usable even if it is exposed to moisture.
The electronic and mechanical components are so designed that they can be
exposed to water.
Such use conditions should however be limited in time, as otherwise the battery
will automatically discharge and additionally an electrolytic reaction be started.
After exposure to salty or dirty water, rinse the sight with distilled water and dry it
subsequently.
Note:
Because of their design, red-dot reflex sights such as the DOCTERsight II plus do
not feature diopter adjustment nor any other facility to compensate visual defects
of the human eye.
Thus, any visual defects of the respective hunter or rifleman will directly affect the
contour of the light spot perceived.
Apparent out-of-roundness, arc-shaped distortion, "star cluster" or frayed edge of
the spot are not indicative of any defect of the instrument but exclusively of some
physiological irregularity of the eye (astigmatism).
In such a case it is recommendable to wear corrective glasses and/or have one's
eyes checked by an ophthalmologist.
ANEF5627 Doctorsight2plus 19.10.2005 11:04 Uhr Seite 15