Chemglass CLS-4033-100 - Manual (Page 3)

3
1. Connect the detachable power cord to the AC/DC converter (DC power supply) and connect to “INPUT 24Vdc” receptacle in
rear of unit and then plug power cord into a suitable electrical outlet.
2. Select range of motion by loosening knob and moving pivot arm to desired location on wheel. NOTE: Ensure spacer is re-
tained between wheel and pivot arm. Tighten knob securely.
3. Mount appropriate tray atop of rocker platform - position pegs into grommets.
SET-UP
(See Figure 1)
24Vdc INPUT Receptacle
Figure 1—Rear View
Mains Fuse
2A/250V
Knob for range of motion
Range of motion wheel
( 5 -14 degrees )
Pivot Arm