Attero Tech MatchBox USB - Manual (Page 13)

MatchBox USB
User Manual
No audio is being transmitted on the CobraNet network.
o
Ensure the MatchBox is running and correctly connected (see above).
o
Ensure the PC is playing audio and the audio software output is configured to use the MatchBox.
o
Check the mode the MatchBox is set up in is correct for the number of channels required going to and from the PC.
o
If using an ASIO host application, check the ASIO driver is installed and the Matchbox is selected as the audio
interface within the application.
o
Check the MatchBox is correctly connected to the CobraNet network (see LED status table above).
o
Check the correct bundle numbers have been assigned to a bundle transmitter.
o
Check the bundles have the correct submap channels allocated corresponding to the Mode the MatchBox is using
(see tables in section 4.2 above).
o
Check the bundle transmission mode is correct for the number of receivers that will receive the bundle.
No audio can be recorded on the PC from the CobraNet network.
o
Ensure the MatchBox is running and correctly connected.
o
Check the Mode the MatchBox is set to is correct for the number of channels required going to and from the PC.
o
Check the transmitting device has a correctly configured bundle number.
o
Check the transmitting device has the submap channels configured correctly.
o
Check the transmitting device has the bundle transmission mode correct for the number of receivers that will
receive the bundle.
o
Check the MatchBox is correctly connected to the CobraNet network (see LED status table above).
o
Check the correct bundle numbers have been assigned to a bundle receiver on the MatchBox.
o
Check the MatchBox receiving bundles have the correct submaps allocated given the Mode the MatchBox is using
(see tables in Section 4.2 above).
o
Ensure the recording device is configured to record from the correct device.
© Attero Tech LLC 2009 Page 9 614-00004-05