Aqua Bath AB7236TS - Manual (Page 2)

For additional information, call the
Aqua Bath Customer Service
Department At 1-800-232-2284
Residential Series
AB7236TS
Model AB7236TS (AB7236TS-L valve on left, AB7236TS-R valve on right).
The tub/shower enclosure shall be Aqua Bath Model AB7236TS (and variations) and shall be molded from a single
sheet of vacuum-formed .1875” one-piece sanitary grade acrylic so as not to have any joints or seams.
Manufacturing Tolerance Of (1/4”) Due To The Nature Of The Materials Used.
Shall meet ANSI 124.1. Unit shall have a backside flame spread of less than 30 (Class B).
Shall be designed to meet NAHB. The unit shall have inside dimensions of 68½" W x 35½" D x 78" H and outside
dimensions of 72" W x 36" D x 84" H. The unit shall weigh approximately 255lbs and shall have contoured flanges
to accept drywall to insure easy and clean installation. The unit has a ribbed bottom for slip resistance (standard),
2 molded in soap dishes on the back wall and an arch design on the back wall.
Available Accessories:
1) Shower curtain rod. 2) Shower curtain - antibacterial, with hooks.
3) Dome light (factory drilled only, must be field installed & light shipped separately from unit).
4) Platform seat (removable). 5) Factory installed shower door frame (shower door to be field installed).
6) Tempered glass shower door (shower to be field installed). 7) ASTM F462 non-slip bottom.
STEAM PACKAGE (AB7236ST)
• 5kw, 240vac, 30A steam generator.
• Electronic on/off switch with timer.
• Adjustable temperature control.
• Tempered glass door.
• Dome light.
12/08
AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax (615) 227-9446
 www.aquabath.com 