Residential series, Ab3639sh, Model ab3639sh – Aqua Bath AB3639SH User Manual
Page 2
For additional information, call the
Aqua Bath Customer Service
Department At 1-800-232-2284
Residential Series
AB3639SH
Model AB3639SH
(AB3639SH-L valve on left, AB3639SH-R valve on right).
The shower enclosure shall be Aqua Bath Model AB3639SH and shall be molded from a single sheet of
vacuum-formed .1875” one-piece sanitary grade acrylic so as not to have any joints or seams.
Manufacturing Tolerance Of (1/4”) Due To The Nature Of The Materials Used.
Shall meet ANSI 124.2. Unit shall have a backside flame spread of less than 30 (Class B).
Shall be designed to meet NAHB. The unit shall have inside dimensions of 36" W x 39" D x 80" H and outside
dimensions of 43½" W x 39½" D x 84" H. The unit shall weigh approximately 180lbs and shall have contoured
flanges to accept drywall to insure easy and clean installation. The enclosure shall have 1 molded soap dish on the
back wall, a 5" threshold and a ribbed bottom for slip resistance (standard)
Available Accessories:
1) Shower curtain rod. 2) Shower curtain - antibacterial, with hooks.
3) Dome light (factory drilled only, must be field installed & light shipped separately from unit).
4) Factory installed shower door frame (shower door to be field installed).
5) Tempered glass shower door (shower door to be field installed). 6) ASTM F462 non-slip bottom.
12/08
AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax (615) 227-9446
www.aquabath.com