Aqua Bath AB6036SH - Manual (Page 2)

For additional information, call the
Aqua Bath Customer Service
Department At 1-800-232-2284
Residential Series
AB6036SH
Model AB6036SH (AB6036SH-L valve on left, AB6036SH-R valve on right).
The shower enclosure shall be Aqua Bath Model AB6036SH or AB6036SS and shall be molded from a single
sheet of vacuum-formed .1875” one-piece sanitary grade acrylic so as not to have any joints or seams.
Shall meet ANSI 124.2. Unit shall have a backside flame spread of less than 30 (Class B).
Shall be designed to meet NAHB. The unit has inside dimensions of 56½" W x 35½" D x 80" H and outside
dimensions of 60" W x 36" D x 84" H. The unit shall weigh approximately 225lbs and shall have contoured flanges
to accept drywall to insure easy and clean installation. The enclosure shall have two molded-in seats, one molded
soap dish centered on the back wall, a 7¾" threshold and a ribbed bottom for slip resistance (standard).
Available Accessories:
1) Shower curtain rod. 2) Shower curtain - antibacterial, with hooks.
3) Dome light (factory drilled only, must be field installed & light shipped separately from unit).
4) Factory installed shower door frame (shower door to be field installed)
5) Tempered glass shower door (shower door to be field installed). 6) ASTM F462 non-slip bottom.
STEAM PACKAGE: AB6036SS
• 5kw, 240vac, 30A steam generator.
• Electronic on/off with timer.
• Adjustable temperature control.
• Dome light.
• Shower door frame and tempered glass shower door.
12/08
AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax (615) 227-9446
 www.aquabath.com 