Aqua Bath AB3632SH - Manual (Page 2)

For additional information, call the
Aqua Bath Customer Service
Department At 1-800-232-2284
Residential Series
AB3632SH
Model AB3632SH (AB3632SH-L valve on left, AB3632SH-R valve on right).
The shower enclosure shall be Aqua Bath Model AB3632SH and shall be molded from a single sheet of
vacuum-formed .1875” one-piece sanitary grade acrylic so as not to have any joints or seams.
Manufacturing Tolerance Of (1/4”) Due To The Nature Of The Materials Used.
Shall meet ANSI 124.2. Unit shall have a backside flame spread of less than 30 (Class B).
Shall be designed to meet NAHB. The unit shall have inside dimensions of 31½" W x 31½" D x 78" H and outside
dimensions of 36" W x 32" D x 84" H. The unit shall weigh approximately 180lbs and shall have contoured flanges
to accept drywall to insure easy and clean installation. The enclosure shall have 2 molded soap dishes on back wall,
a 12" clear acrylic towel bar between, a 7¾" threshold and a ribbed bottom for slip resistance (standard).
Available Accessories:
1) Shower curtain rod. 2) Shower curtain - antibacterial, with hooks.
3) Dome light (factory drilled only, must be field installed & light shipped separately from unit).
4) Factory installed shower door frame (shower door to be field installed).
5) Tempered glass shower door (shower door to be field installed). 6) ASTM F462 non-slip bottom.
12/08
AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax (615) 227-9446
 www.aquabath.com 