Aqua Bath IS4136SH 7? PSY - Manual (Page 2)

ACCESSIBLE SERIES (Psychiatric)
•
Model IS4136SH 7¾” PSY-L valve on left.
• Model IS4136SH 7¾” PSY-R valve on right.
• Bath units designed for psychiatric applications in hospitals,
nursing homes, rehabilitation centers and geriatric homes.
• Acrylic one-piece molded construction simplifies installation.
• Inside dimensions: 36” W x 36” D x 78” H.
• Includes stainless steel grab bars (tamper proof) with mounting
plate and curtain track with pop out carriers and hooks.
• 7¾” threshold, also available with 4” threshold.
• Vacuum-formed from .1875” one-piece sanitary grade acrylic.
For additional information, call the
Aqua Bath Customer Service
Department At 1-800-232-2284
The IS4136SH 7¾” PSY is NOT ADA
compliant. Please see Aqua Bath’s full
line of ADA compliant shower and
tub/shower units. Please check with
your local city and state for code
compliancy. Aqua Bath accepts no
responsibility for final code compliance.
• Manufacturing Tolerance Of (±1/4”) Due To The Nature
Of The Materials Used.
Acrylic Shower Stall
The shower enclosure shall be Aqua Bath model IS4136SH 7¾” PSY acrylic and be molded from a single sheet so as not to
have any joints or seams, shall meet ANSI Z124.2. Unit shall have a backside flame spread of less than 30 (Class B).
Shall be designed to be NAHB LISTED. The enclosure shall have inside dimensions of 36” W x 36” D x 78” H and outside
dimensions of 41” W x 37” D x 84” H. An acrylic recessed soap dish insert shall be installed on the plumbing wall with inside
dimensions of 10” W x 12” H and outside dimensions of 11½” W x 13½” H and shall be sealed from the backside to keep the
unit waterproof. The approximate weight of the unit shall be 230lbs.
Standard Accessories:
1) Two 18” x 1½” diameter horizontal grab bars (one on plumbing wall and one on back wall) and one 18” x 1½” diameter
vertical grab bar (on plumbing wall), fabricated from 18 gauge stainless steel and mounted with stainless steel bolts and secured
from the rear with 3” x 3” x 11 gauge metal mounting plates. The grab bars have a closure plate welded along one side of the bar
that runs full length of the bar to make it tamper proof.
After the grab bars have been factory installed, they will be sealed from the backside making the unit completely waterproof.
2) White PVC curtain track with tamper proof screws and pop out carriers and hooks (designed to pop out at 40lbs of weight).
3) Ribbed bottom for slip resistance (standard).
4) Self-caulking brass drain (tamper proof, fits 2” pipe) with stainless steel strainer and drain is to be field installed.
Available Accessories:
1) Shower curtain – antibacterial.
2) Tamper proof dome light (factory drilled only, must be field installed and light shipped separately from unit).
3) ASTM F462 non-slip bottom.
Received and / or approved by:
Name:______________________________
Company:___________________________
Title:_______________________________
Phone:______________________________
Date:_______________________________
Modifications:
02/09
AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax (615) 227-9446
 www.aquabath.com 