Aqua Bath C6032TS PSY - Manual (Page 2)

CARE SERIES (Psychiatric)
•
Model C6032TS PSY-L valve on left.
• Model C6032TS PSY-R valve on right.
• Bath units designed for hospitals, nursing homes, rehabilitation
centers, hotels, motels and residential applications.
• Meets ANSI A117.1, ADA Guidelines and other standards
for accessibility
• Acrylic one-piece molded construction simplifies installation.
• Inside dimensions: 55" W x 32" D x 78" H.
• Includes stainless steel grab bars (tamper proof) with mounting
plates and curtain track with pop out carriers and hooks.
• Seat required to comply with ADA: Seat Options
1) Lift out seat.
• Vacuum-formed from .1875” one-piece sanitary grade acrylic.
For additional information, call the
Aqua Bath Customer Service
Department At 1-800-232-2284
Please check with your local city and
state for code compliancy. Aqua Bath's
advertised ADA compliant units are
based on our interpretation of the
Americans with Disabilities Act 1991
Guidelines. Field alterations or improper
installation could take the units out of
compliance. Aqua Bath accepts no
responsibility for final code compliance.
• Manufacturing Tolerance Of (1/4”) Due To The Nature
Of The Materials Used.
Tub / Shower
The tub enclosure shall be Aqua Bath model C6032TS PSY acrylic and be molded from a single sheet so as not to have any
joints or seams, shall meet ANSI Z124.1. Shall meet ADA guidelines and other standards for accessibility. Unit shall have a
backside flame spread of less than 30 (Class B). Shall be designed to be ADA COMPLIANT and NAHB LISTED.
The enclosure shall have inside dimensions of 55" W x 32" D x 78" H and outside dimensions of 60" W x 33" D x 84" H.
An acrylic recessed soap dish insert shall be installed on the back wall with inside dimensions of 10” W x 12” H and outside
dimensions of 11½” W x 13½” H and shall be sealed from the backside to keep the unit waterproof.
The approximate weight of the unit shall be 275lbs.
Standard Accessories:
1) Two 24" (on back wall), two 24" (one on each end wall) and one 18” vertical, 1½" diameter 18 gauge stainless steel grab bars
with a closure plate welded to the bottom of each bar (full length) making the bar tamper proof.
Grab bars will be mounted with stainless steel bolts and secured from the rear with 3" x 3" x 11 gauge metal mounting plates.
After grab bars have been factory installed, they will be sealed from the backside making the unit completely waterproof.
2) White PVC curtain track with tamper proof screws and pop out carriers and hooks (designed to pop out at 40lbs of weight).
3) Ribbed bottom for slip resistance (standard).
Available Accessories:
1) Seat required in ADA units; a) Removable lift out seat.
2) Tamper proof dome light (factory drilled only, must be field installed and light shipped separately from unit).
3) Shower curtain - antibacterial, with hooks.
4) ASTM F462 non-slip bottom.
Received and / or approved by:
Name:______________________________
Company:___________________________
Title:_______________________________
Phone:______________________________
Date:_______________________________
Modifications:
02/09
AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax (615) 227-9446
 www.aquabath.com 