Muxlab Surface Mount Transceiver Plate - Manual (Page 2)

© MuxLab Inc. 2013
3. Apply the four rubber standoffs to the medium-
size transmitter/receiver baluns.
4. Insert the medium-size balun
transmitter/receivers firmly into the
Surface Mount Transceiver Plate.
5. Mount the complete assembly to
the furniture or wall surface
using the mounting screws
included with the product.
6. Before tightening the screws,
adjust the final alignment of the
balun assembly.
7. The following diagram shows a typical application.
Technical Drawings
The following drawings provide the basic dimensions.