Muxlab IR Emitter - Manual (Page 2)

© MuxLab Inc. 2008
4. Mount the complete assembly to the furniture or wall surface using the
mounting screws included with the product.
5. Before tightening the screws, adjust the final alignment of the balun
assembly.
6. The following diagram shows a typical application.
Technical Drawings
The following drawings provide the basic dimensions.
3.42" (8.7cm)
2.4" (6.1cm)
.2"
(.51 cm)
.3"
(.76 cm)
.65"
(1.65 cm)
3.42" (8.7cm)
1.07" (2.72cm)