Muxlab HDMI 4x8 Matrix Switch, HDBT - Manual (Page 33)

© MuxLab Inc. HDMI 4x8 Matrix Switch, HDBT, PoE Installation Guide
Page 33
The Port Management submenu allows the user to make individual connections
between specific displays and sources, or wholesale connections between all displays
and sources by means of presets. Sources and displays are presented to the user in any
one of four ways:
• By source name
• By source number
• By display name
• By display number
Figure 19 illustrates sources and displays presented by display number. The user can
make changes to the connection configuration of the device by selecting any option in
the drop-down boxes in the Source column. Once any change is made, the given row
will change color to indicate that a change has taken place. Once all selections have
been made, the user clicks on the Connect button to apply those selections.
Presets are pre-established connection configurations that are used to apply wholesale
mapping instructions between all displays and sources (see Figure 21). The user can
load any one of eight presets to the device. Once a preset is selected from the Preset
drop-down menu, the user clicks on Load Preset to show the connection
configuration of the given preset. To apply the preset, the user clicks on Make
Connections.
To modify a given preset, its name must first appear in the Preset drop-down menu.
The user then makes changes to the connections between displays and sources (any
change will result in a highlighted row). Once all changes are made, the user clicks on
Save Preset. This effectively modifies the connection configuration of the given
preset.
Figure 21: Port Management Submenu – Presets