Muxlab 8 x 8 Cat 5e/6 Line Level Audio Matrix Switch - Manual (Page 9)

© MuxLab Inc. Audio 8x8 Matrix Switch Installation Guide
Page 9
3.3. Pre-Installation Checklist
The Audio 8x8 Matrix Switch provides a centralized switching center via UTP cables.
1. The Matrix Switch is used in conjunction with MuxLab’s analog and digital
Buluns (500028 and 500030).
2. The Matrix Switch is typically installed in a remote telecom room and is connected
to multiple video sources and display devices via Cat 5e/6 UTP. A MuxLab Bulun
is installed at each receiver/amplifier/audio source to support the connection to the
Matrix Switch via a Cat 5e/6 cable.