SawStop Mobile Base Conversion Kit - Manual (Page 2)

1. Never place fingers, toes or other body parts under the mobile base. The base may suddenly lower on you and
cause a severe injury.
2. Do not attempt to use or move the saw on an inclined surface. The saw is very heavy and difficult to stop on
an inclined surface. Attempting to use or move the saw on an inclined surface could result in a severe injury.
3. Make sure the saw is fully lowered to the ground and stable before operating the saw. Otherwise, the saw could
move unexpectedly and cause a severe injury.
4. Do not raise the saw higher than necessary to move it. Instead, raise the saw only enough to provide sufficient
ground clearance.
5. Be sure to unplug or disconnect the saw from power before moving or repositioning it. The main power cord or
the power outlet could be damaged if the saw is not disconnected from power before moving it.
1 SawStop Mobile Base Conversion Kit
Safety
While unpacking your mobile base conversion kit verify that all the components shown on this page are included.
Unpacking Your Conversion Kit
hold-down brackets (2)
conversion linkage bars (2)
hardware bag
assembly instructions
SawStop
®
ASSEMBLY INSTRUCTIONS
Mobile Base Conversion Kit
Model MB-IND-500
For use with the Professional Cabinet Saw