RMS Technologies R325P DRIVER - Manual (Page 2)

Thank you for purchasing the R325P Single-Axis Step & Direction Driver. This product is
warranted to be free of manufacturing defects for one (1) year from the date of purchase.
PLEASE READ BEFORE USING
Before you start, you must have a suitable step motor, a DC power supply suitable for the motor
and a current resistor. The power supply voltage must be between 4 times and 20 times the
motor's rated voltage.
DISCLAIMER
The information provided in this document is believed to be reliable. However, no responsibility
is assumed for any possible inaccuracies or omissions. Specifications are subject to change
without notice.
RMS Technologies reserves the right to make changes without further notice to any products
herein to improve reliability, function, or design. RMS Technologies does not assume any
liability arising out of the application or use of any product or circuit described herein; neither
does it convey any license under its patent rights, nor the rights of others.
Special Symbols
Indicates a WARNING and that this information could prevent injury, loss of
property, or even death (in extreme cases).
R325P User Manual Page 2 of 20 5/29/2013 Version 1.01