Rugged Ridge XHD Soft Top, Khaki, Clear Windows, 97-06 Jeep Wrangler (TJ) User Manual
Rugged Ridge For the car
Fabric Replacement Top
Installation Instructions
For: 1997 - 2006 Wrangler / TJ
Part Numbers:
13725.XX (NO Door Skin) - 13726.XX (NO Door Skin & Tinted Windows)
13729.XX (NO Door Skin) - 13730.XX (NO Door Skin & Tinted Windows)
This product is designed to enhance the
appearance of the vehicle and to shield the
occupants from ordinary weather con-
ditions. Do not rely in any way on the
components of this product to contain
occupants within the vehicle, or to protect
against injury or death in the event of an
accident. This top will not protect the
occupants from falling objects. Never
operate vehicle in excess of manufacture's
specifications.
Installation Tips.
Before you begin to install the new top
Read and follow, precisely, all installation
read all instructions thoroughly. Below are
instructions provided when installing top.
a few tips to make this installation easier.
Failure to do so may result in a poor fitting
After completing the installation, keep
top and could place occupants of the
these instructions for further reference.
vehicle in a potentially dangerous situation.
After installing or reinstalling the top,
For a Smooth Fit:
check to make sure it has been properly
installed before driving.
For ease in installation, the top should be
installed at a temperature above 72 F.
Below this temperature, the fabric may
contract an inch or more, making it hard
to fit to the vehicle.
Qty - 1 Fabric Top
It is normal for the fabric to contract and
Qty - 1 Quarter Window, Right
wrinkle when stored in the shipping carton.
Qty - 1 Quarter Window, Left
Within a few days of the installation, the
Qty - 1 Rear Window
fabric will relax and the wrinkles will
disappear.
Pg.1