Rugged Ridge Soft Top, Door Skins, Black, Tinted Windows, 97-02 Jeep Wrangler (TJ) - Manual (Page 4)

Step (3) : Flip the fabric over so that it wraps
around the header and drape the top
fabric over the tailgate. Raise the header
slightly and work the pockets in the fabric
over the corners of the header. Install an
oval head screw in each corner to secure
the fabric to the header.
Step (4) : Raise the header and bow assembly
towards the windshield and into position.
Inside the top, snap the fabric to the
rear bow (total of six snaps).
Step (5) : Make sure that the center bow is centered
in the hook and loop flap inside the top. Do
not fasten the flap at this time.
Pull down gently on the rear bow and work
the plastic sewn to the rear corner of the
top into the retainer on the vehicle.
Step (6) : Close the header latches to secure the
front of the top to the windshield. Catch
the hook in the slot in the windshield frame
and then close the lever over it so that it
lays flat against the windshield frame.
Step (7) : Wrap and fasten the hook and loop on the
two flaps inside the top around the center
bow.
Pg.4