beautypg.com

Rugged Ridge Dash Multi-Mount System, 11-14 Jeep Wrangler User Manual

11+ jk accessory mount dash organizer, Components: required tools

background image

Copyright © 2013 Omix-Ada

®

, Inc.

460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | [email protected]

11+ JK Accessory Mount Dash Organizer

3. Install Accessory Mount Base. Hooks on arms of
Accessory Mount Base will snap into upper dash-
board vents closest to windsheild.

4. Reinstall factory screw removed in Step 2.

5. Place custom Rubber Tray into dashboard stor-
age area.

1. Accessory Mount Base

(1)

2.

Rubber

Tray

(1)

3. Universal Ball Mount

(1)

4.

Cap

Piece (1)

1. Socket Driver
2. 7 mm Socket

1. Remove factory rubber tray from dashboard stor-
age area above center console.

2. Remove factory screw using a socket driver and
a 7 mm socket. Do not discard factory screw, it will
be reused in product installation.

Page 1/2

13551.11

Components:

Required Tools:

OMIX-ADA

®

TECHNICAL SUPPORT

PHONE: M-F 8am - 5pm EST 1-800-449-6649 | EMAIL: [email protected]

FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com

Read all instructions thoroughly before installation.

Rev 02/2014