Rugged Ridge Stereo Security Console, Gray, 76-95 Jeep CJ & Wrangler - Manual (Page 3)

13104.01 Page 3 of 3 4/27/07
10. Connect all wires to the stereo according to your stereo owner’s manual.
11. Locate (2)-5/16” x 2/12” Hex Head Bolts, (4)-5/16’” Flat Washers, and (2)-5/16” Lock Nuts. Fasten down the
rear of the console through rear holes in the Security Console and holes in Mounting Bracket by using the
location and holes listed in step #5 (Figure 4).
12. Locate (1)-5/16 x 1 ¾” Hex Head Bolt, (2)-5/16” Flat Washers, and (1)-5/16” Lock Nut. With rear bolts in place
fasten down the front of the Security Console to hole previously drilled in step #5.
To lock and unlock Security Console; insert key, push down and turn.
Figure 9