Rugged Ridge Window Visors, Matte Black, 07-14 Jeep 2-Door Wrangler User Manual

Side window air/rain deflectors

, Inc.

Page 1/2

2. Hold and position deflector to determine mounting position.

1. Clean the painted surface where the deflector will be
attached using Isopropyl Alcohol (Rubbing Alcohol).

Note: Application and product my vary from illustrations. Caution: Before driving, ensure that all deflectors
are secured properly.

Please read all instructions before installation of Wind/Rain Deflectors

Preparations Before Installation
∙ Check and determine if Wind/Rain Deflectors are the correct fit for your vehicle.
∙ Wash and Clean all mounting surfaces of the vehicle using Isopropyl Alcohol (Rubbing Alcohol).
∙ To ensure proper bond apply only when temperatures of mounting surfaces is between 65-110°F.
∙ Be sure all mounting surfaces are dry before installation

3. Remove 2” of tape liner from each end of the deflector.

Side Window Air/Rain Deflectors

This manual is related to the following products:

Window Visors, Matte Black, 07-14 Jeep 4-Door Wrangler

See also other documents in the category Rugged Ridge For the car: