beautypg.com

Rugged Ridge Window Rain Deflectors, 08-10 Jeep Liberty (KK) User Manual

Rugged Ridge For the car

background image

STEP 4 - Place the deflector in a desired location on the
door.

STEP 3 - Remove 2” of tape liner from each end of the
deflector.

STEP 1 - Clean the painted surface where the deflector
will be attached using Isopropyl Alcohol (Rubbing Alcohol).

STEP 2 - Hold and position deflector to determine
mounting position.

Page 1 of 2

Installation Instructions - Side Window Air/Rain Deflectors

Note

:

Application and product my vary from illustrations.

Caution:

Before driving, ensure that all deflectors are secured properly.

Please read all instructions before installation of Wind/Rain Deflectors

Preparations Before Installation

∙ Check and determine if Wind/Rain Deflectors are the correct fit for your vehicle.

∙ Wash and Clean all mounting surfaces of the vehicle using Isopropyl Alcohol (Rubbing
Alcohol).

∙ To ensure proper bond apply only when temperatures of mounting surfaces is between
65-110°F.

∙ Be sure all mounting surfaces are dry before installation.

Continue to Next Page