beautypg.com

Rugged Ridge Billet Aluminum Tailgate Stop, 87-14 Jeep Wrangler User Manual

Page 3

background image

4. Loosely preassemble the rubber lock nuts to slider base with supplied bolts.

Make sure that the lip of the rubber lock nut is positioned outward towards the
base of the slider. With rubber lock nuts in place position the slider over the
predrilled mounting holes and push rubber lock nuts into holes.


NOTE: the rubber lock nuts are designed to compress as they are tightened.
This will lock the slider into place.

5. Tighten rubber lock bolts evenly to secure the Tailgate Stop to rear gate.


Always try to use this product at a 90 degree open position. This allows

for the proper positioning of the lock rod to be tightened under the

slider rack at the notched location.

(1/08/07) version 2

.

Pg.3