Rugged Ridge Mesh Grille Insert, Black, 07-14 Jeep Wrangler (JK) User Manual
Jeep, Jk grill insert
460 Horizon Drive #400 | Suwanee, GA 30024 USA | www.omix-ada.com | Copyright © 2013 Omix-Ada
®
, Inc.
Page 1/2
Stainless Steel 11401.21
Black 11401.31
JEEP
®
JK GRILL INSERT
OMIX-ADA
®
TECHNICAL SUPPORT
PHONE: M-F 8am - 5pm EST 1-800-449-6649 | EMAIL: [email protected]
FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com
Grill Insert - 1
Grill Fasteners - 2
Bolt - 4
Washer - 4
Lock Nut - 4
1. Open vehicle hood, remove grill rivets with a flat tool (e.g.
screwdriver). Unplug marker lights. Pull grill off from spring clips
attached at bottom of grill. Save components removed.
Aftermarket winch and/or bumper may need to be
removed.
2. Place grill insert and grill fasteners inside grill.
Cutout in grill insert should be positioned to the lower
side of grill on driver’s side. (Circled in
Red
)
NOTICE
NOTICE
Stainless Steel 11401.22
Black 11401.32