beautypg.com

Rugged Ridge Hood Lift Kit, 07-14 Jeep Wrangler (JK) User Manual

Jk hood prop

background image

Page 1 of 2

Contents: Quantity:

Lower Mounting Bracket

Upper Mounting Bracket

Nut Plate

Threaded Ball Stud

Nyloc Nut

M6 x 18 Bolt

M6 Nyloc Nut

M6 Washer

M5 x 16 Bolt

M5 Washer

Struts

Rubber Gaskets

JK Hood Prop

(2)

(2)

(2)

(2)

(2)

(2)

(2)

(4)

(4)

(4)

(2)

(2)

11252.51

9/23/10

2.

Insert supplied M6 bolt and M6 washer through preexisting hole in the sheet metal behind the fender

bolt (Figure 3). Rotate bracket up and push bolt through the lower mounting bracket. Place another M6 washer

over bolt and thread on the M6 nut. Fully tighten both the fender bolt and the M6 bolt, washer, and nut

assembly.

1.

Place the hood in the open position using factory hood prop. Remove the 10mm fender bolt closest to

Figure 1. Figure 2.

Figure 3.