beautypg.com

Rugged Ridge Throttle Body Spacer, 91-06 Jeep Cherokee and Wrangler User Manual

Rugged Ridge For the car

background image

Page 1 of 1

17755.01

Contents: 1. Throttle Body Spacer (1)

2. Throttle Body Gaskets (2)
3. M6 Throttle Body Bolts (4)
4. Throttle Linkage Spacers (3)
5. M6 Throttle Linkage Bolts (3)

1. Remove Intake Tube from the throttle body.

Throttle Body

Gasket

Spacer

Gasket

Intake Manifold

2. Remove 4 bolts that fasten the throttle body to the intake manifold. Lift throttle body and remove
gasket. Install Throttle Body Spacer in between throttle body and intake manifold, using supplied
longer bolts. Install supplied gaskets between intake manifold and throttle body spacer, and between
throttle body spacer and throttle body. Torque bolts to 23 Nm (200 in. lbs.)

5. Remove 2 bolts that hold the throttle cable bracket to the intake manifold. Use supplied M6 Throttle
Linkage Bolts and Throttle Linkage Spacers to space throttle cable bracket up. Re-Install intake tube.

Longer Bolt

Spacer

THROTTLE BODY SPACER, JEEP WRANGLER (YJ & TJ) 91-06 4.0L & 91-02 2.5L, CHEROKEE (XJ) 91-01 4.0L & 91-00 2.5L 91-06