Rugged Ridge 3-Inch Round Tube Side Steps, Black, 76-86 Jeep CJ7 - Manual

Page 1 of 3
Contents:
1. Tow Hitch
2. Backing Plate
3. M12 x 45 HHCS
4. M12 Washers
5. M12 Lock Washers
1976-2006 Jeep CJ, Wrangler XHD Tow Hitch
Quantity:
1
2
8
8
8
11580.03
Notice: This hitch is designed for light duty towing (2,000 towing weight, 200lb tongue weight capacity). Always
follow manufacturers recommended towing specifications when towing or using any tow hitch
accessories.
1. Supporting the tow hitch from below, raise the tow hitch up (Figure 1) between the two sub-frames and slot
the hitch in the pre-cut opening in the bumper.
2. It is necessary to temporarily locate and secure the tow hitch in order to ease the installation of backing plates.
While supporting the tow hitch thread a supplied M12 bolt through the top right corner of the sub-frame and
into the corresponding welded nut of the tow hitch (Figure 2).
3. Repeat on the other side of the tow hitch.
Figure 1. Figure 2.
Notice: This tow hitch must only be used with the Rugged Ridge 1976-2006 XHD Bumper, part number 11546.10.