beautypg.com

Rugged Ridge 3-Inch Double Tube Rear Bumper, 87-06 Jeep Wrangler User Manual

Page 3

background image

Step (3) continued.

Attach brackets with the (4) 10mm bolts, flat washer, lock washer and nuts supplied for
each side. Tighten to 45lbs. NOTE: ON 97-2006 Wranglers there might be a tight fit
between the rear cross member and the fuel tank. A second person to help might
be needed.

Step (4)

Locate rear bumper onto the mounting brackets an attach through the top and bottom of
the brackets with (4) 12mm bolts, flat washers, lock washers, and nuts supplied. Tighten
to 45lbs torque.

WARNING: IT IS RECOMMENDED NOT TO EXCEED ANY TONGUE WEIGHT IN EXCESS OF 200LBS

PG. 3