Accusplit AX602FY - Manual (Page 3)

8-9
A A B
• “Split time” refers to an elapsed time required to cover a distance from
the start to a given point.
• “Lap time” refers to an elapsed time required to cover a given section
of the whole distance.
Lap time
Split time
Start
1. STANDARD MEASUREMENT
Hour Seconds
Minutes 1/100 seconds
START STOP RESET
8
2. ACCUMULATED ELAPSED TIME MEASUREMENT
9
START STOP RESTART
RESET STOP
Restart and stop
of the stopwatch
can be repeated
by pressing “A”.
B A
A A
10-11
10
3. SPLIT TIME/LAP TIME MEASUREMENT
Note: When the number of stored measurements
exceeds 90, fl ashing “FULL” appears, and when
it exceeds 100, a warning sound starts beeping.
B
A B
A
B
B
START SPLIT-LAP 1
SPLIT-LAP 2
RESET STOP
SPLIT-LAP 8
The split/lap time can
be measured repeated
by pressing “B”.
Split/lap number
Split time
Lap time
Accumulated
elapsed time
Finish time
11
The stopwatch can store up to 100 split times, 100 lap times and total elapsed
time. They are automatically entered into the memory.
• With each press of “C”, the time stored is recalled. The time can be
recalled successively by keeping the button pressed.
• To stop the recall of the stored data, press “A”, “B”, or “D”. The
measurements when the stopwatch was stopped will be shown.
Then, press “B” to reset the digits to “00”.
4. HOW TO USE THE MEMORY FUNCTION
B
C C
A
C
C
“RECALL” more
Finish time Reset to “00”