Actiontec electronic GT704WR - Manual (Page 43)

40
Actiontec 54 Mbps Wireless Cable/DSL Router User Manual
41
Chapter 4 Using Advanced Setup
Netmeeting
If a computer on the network uses Netmeeting, enable Netmeeting, by clicking the
circle next to “On” and entering the IP address of the computer. Click Next, then
click Save and Restart to apply the settings. If Netmeeting is not needed, click the
circle next to “Off.”
☞
Note: Netmeeting is used for NAT /Private IP addressing only. If
the computer is configured for Unnumbered Mode and has a
Public
IP Address, Netmeeting does not have to be enabled.
Website Blocking
Selecting Website Blocking in the “Advanced Configuration” screen generates the
“Website Blocking” screen. This feature enables the Router to block Web sites to all
computers on the network. To block a Web site, enter the address of the Web site
in the “Website” text box and click Add. The blocked Web site address is displayed
in the “Blocked Website List” text box, and will not be available to computers on
the network. To remove a blocked Web site, click on it in the “Blocked Website
List,” then click Remove.