beautypg.com

Rugged Ridge Rear Corner Guards, Body Armor, 97-06 Jeep Wrangler User Manual

Page 2

background image

11650.01-11650.02 Installation instructions


Step 3: Test fit the Rear Corner Guards to the vehicle before removing the
plastic backing film. This will aid in aligning the piece properly before securing
with the two-sided 3M tape.

Step 4:Position the armor onto the rear fender. Make sure that it is evenly
spaced before applying any pressure to armor. When satisfied with placement
apply pressure to all areas to properly secure armor to vehicle. Reinstall the side
fuel neck assembly, and rear tail lights. Install the (4) license plate tabs in holes
from supplied hardware.










Pg.2