Setup data, Adjustments, Arninge – Brocks Performance Bagger Dragshocks (Race Version) (98-12) H-D Tourers FLH/FLT User Manual
Page 4

Öhlins Racing AB
Box 722
S-194 27 Upplands Väsby, Sweden
Phone +46 8 590 025 00
fax +46 8 590 025 80
© Öhlins Racing AB. All rights
reserved. Any reprinting or
unauthorized use without the written
permission of Öhlins Racing AB
is prohibited.
Öhlins products are subject to
continuous improvement and
development, therefore, although
these instructions include the most
up-to-date information available at
the time of printing, minor updates
may occur.
To find the latest information
contact an Öhlins distributor.
Please contact Öhlins if you have
any questions regarding the
contents in this document.
SeTup DaTa
Spring
preload
adjuster
Compression
damping
adjuster
Rebound
damping
adjuster
arninge!
⚠
Before riding, always make sure that the basic settings
made by Öhlins are according to recommended Set-
up Data. Read about adjustments and setting up in
the Öhlins Owner’s Manual before you make any
adjustments. Contact an Öhlins dealer if you have any
questions about setting up.
aDjuSTMenTS
Part no. MI_HD357_0
Issued 2013-09-17
Length
337
0
/
-10
mm
Stroke
90
mm
Rebound
14
clicks
Compression
14
clicks
Spring preload
12
mm
Spring free length
220
mm