Brocks Performance ShortMeg Full System 14'' Muffler Yamaha FZ-09 User Manual
Page 3
Document ID 996525
Page 3 of 3
Caution: Failing to follow the steps below may result in
damage to your bike!
DO NOT START BIKE UNTIL YOU HAVE ENSURED A MINIMUM ¼-INCH CLEARANCE
BETWEEN THE EXHAUST COMPONENTSAND ALL BODYWORK/PARTS.
Failure to ensure proper clearance may result in burned plastic. Brock’s Performance exhaust systems are
designed to provide appropriate clearances. If minimum clearances are not obtained, remove the springs on the
exhaust system and adjust until proper clearance is achieved.
It is also recommended that the entire exhaust
system be wiped down with rubbing alcohol to remove oil and fingerprints before starting the bike. This will help
prevent tarnishing of the finish after the bike has been started and the exhaust is heated up.
CONGRATULATIONS! INSTALLATION IS COMPLETE.
All Brock’s Performance products are designed for closed-course racetrack use ONLY!
For more information on Brock’s Performance Warranty and Terms and Conditions: www.BrocksPerformance.com
> About Us > Terms and Conditions
For Questions and Comments: www.BrocksPerformance.com > Customer Service > Contact Us
or call the Tech Line 937-912-0054