Martin Universal Design Indigo Mobile Taboret - Manual (Page 3)

Assembly Instructions - Page 3
STEP 2.
Placing the [4] shelves into
position.
NOTE: This step is best
assembled with the help of
another person.
Have one person hold onto
both sides of the Mobile
Taboret while the other
person places the shelves
into position.
Each shelf has two lower “L”
Hooks that must fit over the
bottom (3rd) wire row, while
the [2] top wire ends need to
be positioned on the top (1st)
wire row. See illustration 1
and FIG 2.
These shelves snap easily
into place.
REPEAT with all 3 remaining
shelves.
Page 3
Nov 07 RPI
Side of Taboret
1st wire row
2nd wire row
3rd wire row
ILLUSTRATION 1
FIG 2
1st wire row
2nd wire row
3rd wire row
WIRE END
“L” HOOK