Minka Group F596-PN/TL - Manual (Page 12)

10. I
NSTALLING THE
L
IGHT
B
ULB
& B
OTTOM
H
OUSING
WARNING: Shut of the power
supply before removing or replacing
lamp. In handling of halogen bulb,
care should be taken not to touch it
with your bare hands. Oil residue will
shorten the life of the halogen bulb. If
you accidentally come into contact,
wipe thoroughly with a clean, lint-free,
cotton cloth. Allow the bulb to cool
off for 10 minutes before changing the
bulb. Use light bulb in accordance
with the fan's specification. TO
REDUCE THE RISK OF FIRE DO
NOT EXCEED MAXIMUM
WATTAGE RATING.
Step 1. Install 50W MR16 2-pin base
halogen bulb. (Fig. 19).
Step 2. Install the bottom housing by
carefully turning it clockwise until
snug. DO NOT OVERTIGHTEN.
(Fig. 19) Fig. 19
Bottom housing
Light plate
50 W MR16 2-pin
base halogen bulb